Heat Sink
Showing 1–24 of 36 results
-
Heat Sink
(2 Pc) 9V Battery Connecting Wire Adapter Snap Connector Clip Lead Wires Holder DC 5.5×2.1 mm Jack Clip Power Cable For DIY 9V Battery Clip Socket with DC Plug
Heat Sink(2 Pc) 9V Battery Connecting Wire Adapter Snap Connector Clip Lead Wires Holder DC 5.5×2.1 mm Jack Clip Power Cable For DIY 9V Battery Clip Socket with DC Plug
- DC 5.5*2.1 Jack Clip Power Cable For DIY.
- Good quality DC pin and Battery Connector used.
- Can be used for various DIY Electronic Projects and Arduino Projects.
SKU: 2_Pc_Dc_Pin_Battery_Connector -
Heat Sink
(5 Pc) 9V Battery Connecting Wire Adapter Snap Connector Clip Lead Wires Holder DC 5.5×2.1 mm Jack Clip Power Cable For DIY 9V Battery Clip Socket with DC Plug
Heat Sink(5 Pc) 9V Battery Connecting Wire Adapter Snap Connector Clip Lead Wires Holder DC 5.5×2.1 mm Jack Clip Power Cable For DIY 9V Battery Clip Socket with DC Plug
- DC 5.5*2.1 Jack Clip Power Cable For DIY.
- Good quality DC pin and Battery Connector used.
- Can be used for various DIY Electronic Projects and Arduino Projects.
SKU: 5_Pc_Dc_Pin_Battery_Connector -
Heat Sink
1 Pc 5v Relay Module for Arduino ARM PIC AVR MCU with Indicator Light LED One Channel Relay Module Works with Arduino Boards
Heat Sink1 Pc 5v Relay Module for Arduino ARM PIC AVR MCU with Indicator Light LED One Channel Relay Module Works with Arduino Boards
- 5V DC low level trigger
- 5 V relay can be used for home automation configured with micro-controller
- LED indication of relay functioning
- Operating voltage: DC 5V; Trigger current: 5mA; Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
- Trigger Type: Low = ground level = logic 0 = logical false | High = supply voltage (usually Vcc or Vdd) = logic 1 = logical true.
SKU: 1 Pc Relay Module -
Heat Sink
1 Pc IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
Heat Sink1 Pc IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
- Voltage: 3.3V – 5VDC Detection distance: 2m–60m (adjustable)
- Pin definition:VCC, GND, OUT Pitch:2.54mm
- Proximity sensing Gesture detection Operating range: 4-8in (10-20cm)
- Best IR sensor for making Automatic hand sanitizer dispenser machine
SKU: 1 Pc IR Sensor -
Heat Sink
1 Set IR Sensor 3 Pin Module with Single Channel Relay Module for Arduino 1 Channel Relay Module for DIY for sanitizer kits and Electronic Projects
Heat Sink1 Set IR Sensor 3 Pin Module with Single Channel Relay Module for Arduino 1 Channel Relay Module for DIY for sanitizer kits and Electronic Projects
- 5V DC low level trigger Relay Module and IR Infrared Obstacle Avoidance Sensor Module
- 5 V relay can be used for home automation configured with micro-controller
- LED indication of relay functioning and IR Sensor Module
- Operating voltage: DC 5V; Trigger current: 5mA; Normally open interface maximum load: AC 250V/10A, DC 30V/10A.
- Trigger Type: Low = ground level = logic 0 = logical false | High = supply voltage (usually Vcc or Vdd) = logic 1 = logical true.
SKU: 1 Set IR Sensor+Relay -
Heat Sink
1 Set Water Distributor Splitter Suitable for Air Cooler Elbow Set 1 pc of Water Splitter and 3 pcs of Elbow
Heat Sink1 Set Water Distributor Splitter Suitable for Air Cooler Elbow Set 1 pc of Water Splitter and 3 pcs of Elbow
- Water distributor splitter is a device used to divide a single water source into multiple outlets.
- It is also known as a hose splitter or water hose Y connector.
- Enables simultaneous watering of different areas or plants.
- Commonly used in gardening, lawn care, and outdoor water-related activities.
- Available in various configurations, such as 2-way, 3-way, 4-way, etc., depending on the number of outlets needed.
- Easy to install and use, making it a practical solution for managing water flow from one source.
SKU: 1 Set Water Distributer -
Heat Sink
10 Pcs 3pin infrared ir receiver sensor tsop1838 vs1838 1838 38khz receiver sensor module
- The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
- TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
- They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
- Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) – 10 to 15 Meters
SKU: 10 Pcs IR Receiver -
-
Heat Sink
10 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
Heat Sink10 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
- Voltage: 3.3V – 5VDC Detection distance: 2m–60m (adjustable)
- Pin definition:VCC, GND, OUT Pitch:2.54mm
- Proximity sensing Gesture detection Operating range: 4-8in (10-20cm)
- Best IR sensor for making Automatic hand sanitizer dispenser machine
SKU: 10 Pcs IR Sensor -
-
Heat Sink
12v DC Digital Volt Ampere Meter DC 100V 10A Amp Voltage Current Meter Tester 0.56 Inch 3 Bits Blue+Red Dual LED Display Panel
Heat Sink12v DC Digital Volt Ampere Meter DC 100V 10A Amp Voltage Current Meter Tester 0.56 Inch 3 Bits Blue+Red Dual LED Display Panel
- Operating Current: <20mA;Minimum resolution (A): 0.01A;Measure current: 10A
- Operating voltage: DC 4 ~ 30V; Measure voltage: DC 0 ~ 100V; Minimum resolution (V): 0.1V
- 10Amp Voltage Current Meter Tester with 3 Bits Blue + Red Dual LED Display
SKU: Digital Volt Amp Meter Small -
Heat Sink
2 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
Heat Sink2 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
- Voltage: 3.3V – 5VDC Detection distance: 2m–60m (adjustable)
- Pin definition:VCC, GND, OUT Pitch:2.54mm
- Proximity sensing Gesture detection Operating range: 4-8in (10-20cm)
- Best IR sensor for making Automatic hand sanitizer dispenser machine
SKU: 2 Pcs IR Sensor -
Heat Sink
20 Pcs 3pin infrared ir receiver sensor tsop1838 vs1838 1838 38khz receiver sensor module
- The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
- TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
- They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
- Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) – 10 to 15 Meters
SKU: 20 Pcs IR Receiver -
-
Heat Sink
20 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
Heat Sink20 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
- Voltage: 3.3V – 5VDC Detection distance: 2m–60m (adjustable)
- Pin definition:VCC, GND, OUT Pitch:2.54mm
- Proximity sensing Gesture detection Operating range: 4-8in (10-20cm)
- Best IR sensor for making Automatic hand sanitizer dispenser machine
SKU: 20 Pcs IR Sensor -
Heat Sink
3 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
Heat Sink3 Pcs IR sensor Obstacle Avoidance Infrared Reflection Photoelectric Sensor Module Infrared Sensor for Sanitizer Machine
- Voltage: 3.3V – 5VDC Detection distance: 2m–60m (adjustable)
- Pin definition:VCC, GND, OUT Pitch:2.54mm
- Proximity sensing Gesture detection Operating range: 4-8in (10-20cm)
- Best IR sensor for making Automatic hand sanitizer dispenser machine
SKU: 3 Pcs IR Sensor -
Heat Sink
30 Pcs 3pin infrared ir receiver sensor tsop1838 vs1838 1838 38khz receiver sensor module
- The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
- TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
- They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
- Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) – 10 to 15 Meters
SKU: 30 Pcs IR Receiver -
Heat Sink
40 Pcs 3pin infrared ir receiver sensor tsop1838 vs1838 1838 38khz receiver sensor module
- The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
- TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
- They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
- Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) – 10 to 15 Meters
SKU: 40 Pcs IR Receiver
